T3 Welded Fixing Without Nosing Stair Tread For Steel Ladder 40mm Bearing Bars Pitch
The introduction of bearing bars at 40mm pitch steel ladder stair tread
T3 type steel ladder step steel grating is welded by bearing flat steel and cross bar, and then wrapped and welded with pattern front guard plate on one side. This type of steel ladder step steel grating is fixed by welding, which is suitable for permanent non removable steel ladder and is mostly used for equipment surrounding platforms.
T3 type 40mm flat steel distance steel ladder step grid welding method
The welding method is to weld the first flat steel at each corner of the steel grating, with the weld length of no less than 20mm and the height of no less than 3mm.
The Attribute table of T3 Without Nosing Bolted Fixing Stair Tread For Steel Ladder Bearing Bars At 40mm Pitch
| Name | T3 type flat steel 40mm spacing specification steel ladder step plate grating |
| Color | silver white |
| Material | carbon steel q235 and zinc |
| Surface | hot galvanized |
| Cross bar spacing (mm) | 10 |
| Flat steel section (mm * mm) | 25*3,25*5,32*5,40*5 |
| Maximum length of step (mm) | 450,750,1200,1500 |
| Spacing of flat steel (mm) | 40 |
| Tread plate width (mm) | 115,155,195,235,275,315 |
| Performance | bearing, anti-skid, anti-corrosion and convenient installation |
| Origin | Anping, Hebei,China |
| Transportation | Shipping |
| standard | iso9001 |
Performance of T3 flat steel 40mm spacing steel ladder step plate grating
This kind of step board is the most widely used variety in the industrial field. In the series of steel grating, it has the strongest resistance to surface impact, excellent compression and bending resistance, fixed welding method, convenient installation, hot galvanizing treatment, good corrosion resistance, light structure, ventilation and light transmission, no accumulation of rain and snow, free from maintenance, and can adapt to the outdoor environment.
Where is the steel ladder step plate grating with 40mm spacing specification of T3 flat steel applied?
The step grid is mainly used in the steel ladders of steel structure plants in chemical plants, polysilicon projects, petroleum, power plants, sewage plants, etc., to adapt to the harsh outdoor environment of the plant or the scene with vibration and impact.
Instructions for customization of T3 flat steel 40mm spacing specification steel ladder step plate
You need to transmit the design drawings to us. If you have special requirements, please note to us. We will quote for you according to your personalized customization needs and quantity. The payment method is phased payment.
